To Rinie_Hoff: PP treatment

  • My PP treatment is quite standard for all my photos:
    1. Reduce noise using NeatImage. I developed 3 settings, depending on the noise level
    2. Adjust colour balance: red +3 to +5, green -3 to -5 and yellow +4 to +6. The yellow is to add some soft tones to the shot
    3. Boost saturation from +5% to +10%
    4. Boost contract by +4 to +8
    5. Reduce highlights by -4 to -8
    6. Increase or reduce mid-tones (depending on the light levels)
    7. Reduce brightness if needed
    8. Crop and resize
    9. Sharpen slightly
    10. Add borders
  • Re: To Rinie_Hoff: PP treatment
    Thanks very much, Tai/ I will try it out later.

    Rinie