mikeo (12113) 2007-09-20 13:56:22

Hi, as in title... Hope you like it!

greetings,

mihcal

Finland_in_Eton (8) 2007-09-07 01:26:26

I ran this through the color fade tool in Paint Shop Pro Photo XI. Put it through digital noise removal at a low setting and then put it through the clarify tool to improve the contrast. Finished it off by using the soften tool, set to low and 'smoothed out' the noise in the water.

smarcell (14105) 2007-08-08 01:33:35

I just uset the PS automatic level adj, and slightly increased saturation, by 6 % only.

mehr (1358) 2007-04-18 15:07:29

I have done:
- Auto adjust colors
- less expasure
- sharpen and framing
I hope you like it.

banyanman (7716) 2007-03-08 08:57:46

I simply increased contrast by +10 and saturation by +10. The difference is subtle, but it makes the shot crisper.

isabela_sor (41919) 2007-02-17 14:29:37

Just wanted to add more contrast,a little bit saturation!..and a little crop in the left part
Tell me what you think about it,Ali
All the best

isabela_sor (41919) 2007-01-23 06:42:22

Only focal b&w, because now,in my opinion, the pic is more powerful .....What do you say,Ali?
All the best
Isabela

vagabondtravels (6097) 2007-01-20 21:05:08

Hey Pari

Hope you don't mind but I did a small workshop. Just cropped. kind of rule of thirds ;)
have a good day
Ben

pari_ali (425) 2007-01-18 10:57:39

The original was taken at dusk and had almost no colour I did not like the earlier ws I had done so I thought I would try out soemthing different. Mostly it is selective saturation have increased the green and reds. Adjusted levels and also used brightness and contrast. Used a blue filter after selecting the sky and some of the water.
Then copied a part of the house flipped it over and pasted it under a copy of the picture of reducing the opacity till the pasted house showed under it. Then gave it some gausian blurring effect and some rippling just a bit of tomfoolery I think I should have done the vegetation on the side as well to make it more realistic

pari_ali (425) 2007-01-18 10:37:28

I increased saturation after selecting the colours adjusted the levels and contrast then pasted the original on a lower layer while reducing the opacity of the saturated layer