Photos

A hot air balloon has three essential parts: the burner, which heats the air; the balloon envelope, which holds the air; and the basket, which carries the passengers.

Hot air balloons are based on a very basic scientific principle: warmer air rises in cooler air.

Rising Balloons
To keep the balloon rising, you need a way to reheat the air. Hot air balloons do this with a burner positioned under an open balloon envelope. As the air in the balloon cools, the pilot can reheat it by firing the burner.

Modern hot air balloons heat the air by burning propane, the same substance commonly used in outdoor cooking grills. The propane is stored in compressed liquid form, in lightweight cylinders positioned in the balloon basket. The intake hose runs down to the bottom of the cylinder, so it can draw the liquid out.

Because the propane is highly compressed in the cylinders, it flows quickly through the hoses to the heating coil. The heating coil is simply a length of steel tubing arranged in a coil around the burner. When the balloonist starts up the burner, the propane flows out in liquid form and is ignited by a pilot light. As the flame burns, it heats up the metal in the surrounding tubing. When the tubing becomes hot, it heats the propane flowing through it. This changes the propane from a liquid to a gas, before it is ignited. This gas makes for a more powerful flame and more efficient fuel consumption.

In most modern hot air balloons, the envelope is constructed from long nylon gores, reinforced with sewn-in webbing. The gores, which extend from the base of the envelope to the crown, are made up of a number of smaller panels. Nylon works very well in balloons because it is lightweight, but it is also fairly sturdy and has a high melting temperature. The skirt, the nylon at the base of the envelope, is coated with special fire-resistant material, to keep the flame from igniting the balloon.

The hot air won't escape from the hole at the bottom of the envelope because buoyancy keeps it moving up. If the pilot continually fires the fuel jets, the balloon will continue to rise. There is an upper altitude limit, however, since eventually the air becomes so thin that the buoyant force is too weak to lift the balloon. The buoyant force is equal to the weight of air displaced by the balloon, so a larger balloon envelope will generally have a higher upper altitude limit than a smaller balloon.
(Source: HowStuffWorks, Inc. )

Exposure program: Manual
Exposure Time: 1/15
F-Stop: f/13.0
ISO Speed Ratings: 400
Focal Length: 10/1 mm
Date Taken: 2007-06-03 05:30
Metering Mode: Average